Decimator MC-DMON-Quad - 4x SDI zu SDI und HDMI OpenGear Card
zzgl. Umsatzsteuer zzgl. Versandkosten
Nicht am Lager! Ware wird nachbestellt. Zulieferung je nach Verfügbarkeit beim Hersteller ca. 5-30 Werktage.
- Artikel-Nr.: DD-OGDMON4
- Hersteller-Nr.: MC DMON QUAD
- Versandgewicht: 1,00 kg
Decimator Design - MC-DMON-QUAD OpenGear Card
The DMON-QUAD from Decimator Design is a low cost SDI Quad-Splitter with SDI Outputs, Custom Layouts and Audio Meters.
This card follows the OpenGear standards and supports openGear DashBoard for control. The DR1-10B1G rear is sold seperately and has 10 BNC connectors and a 3 pin connector for RS422/485.
FEATURES:
- Supports 3G level A and B on inputs and output, allowing conversion between 3G level A and B
- Low cost (3G/HD/SD)-SDI 1 to 4 Multi-Viewer or 4 to 1 input multiplexer
- Custom Layouts with various standard layouts
- 16 Character UMD overlay per window with individual enables, custom positioning and size
- 8 Channel Audio Metering overlay per window with individual enables, custom positioning and size
- Horizontal and/or Vertical image flipping per window
- Audio ID overlay
- Tallies can be applied to either Tally Boxes (Default) or Border
- Tally boxes allows for up to 4 Tallies per window
- Fast switching between inputs using Full-Screen scaling
- Selectable output format in both Full-Screen Multi-Viewer mode
- Low latency buffering for each input allowing non-synchronous inputs
- 4x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
- Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously
- Variable aspect ratios per window
- In Pass-Through mode the selected input is passed through to both the (3G/HD/SD)-SDI outputs
This unit also includes:
- GPI on RJ-45 connector for Tallies and Remote Switching
- RS422/485 on RJ-45 connector for Dynamic UMD and Tallies
- USB port for control and firmware updates
| Funktion: | MultiViewer |
| Bauform: | OpenGear Card |
| Steuerung: | OpenGear DashBoard, USB |
| Quellen + Senken: | 4x1 |
| Inputs: | SDI |
| Outputs: | SDI |
| Anschluß: | BNC 75 Ohms |
| Power: | 5 ~ 32 V DC |
| Standards: | 60 / 50 / 30 / 25 / 24 Hz, 720p, 1080i, 1080p, 1080psf, SD |
SPECIFICATION
| VIDEO FORMATS | 3G:SMPTE 424M@2.97 and 2.967Gb/s • 1080p@60/59.94/50Hz HD:SMPTE 292M/274M/296M@1.485 and 1.435Gb/s • 1080i@60/59.94/50Hz • 1080p/psf@30/29.97/25/24/23.98Hz • 720p@60/59.94/50/30/29.97/25/24/23.98Hz SD:SMPTE 259M@270Mb/s • 625i50 • 525i59.94 |
| INPUTS | • 4 x (3G/HD/SD)-SDI • USB Mini B for control and updates • 3-pin connector for UMD and Tallies via RS422/485 |
| OUTPUTS | • 1 x 10-bit (3G/HD/SD)-SDI |
| LED STATUS | • Power • 4x Signal Lock and rate |
| POWER | • +5V to +24V DC, 6 Watts |
| DIMENSIONS | OpenGear Card |
| Funktion: | MultiViewer |
| Bauform: | OpenGear Card |
| Steuerung: | OpenGear DashBoard, USB |
| Quellen + Senken: | 4x1 |
| Inputs: | SDI |
| Outputs: | SDI |
| Anschluß: | BNC 75 Ohms |
| Power: | 5 ~ 32 V DC |
| Standards: | 60 / 50 / 30 / 25 / 24 Hz, 720p, 1080i, 1080p, 1080psf, SD |
Decimator Design PYT LTD mit Basis Australien ist ein seit Jahren im Broadcast Markt bekannter Entwickler und Hersteller von kostengünstigen und leistungsstarken Signalwandlern. Cross-, Up- und Down-Konversion aber auch MultiView Processing sind die Key-Technologien der Australier.
